Skip to content

Language

Wholesale Pricing for Agricultural Dealers Dealer Pricing Available BECOME A DEALER

Walterscheid | PTO Complete Driveline P400 Series | 1210mm | 113137

Original price $839.77 - Original price $839.77
Original price
$839.77
$839.77 - $839.77
Current price $839.77

Walterscheid 113137 is a genuine P400 Series PowerDrive PTO driveline, OEM 1113137, designed for compatible agricultural PTO-driven equipment. This 1210 mm complete driveline assembly includes factory-installed P-Series cross and bearing kits at both ends, telescoping profile tubing, and a complete yellow PG25Z safety guard. The driveline is supplied without connection end yokes, allowing the required tractor-side and implement-side connections to be selected separately.

The P400 PowerDrive driveline is rated at 53 HP (39 kW) at 540 RPM and 83 HP (61 kW) at 1000 RPM under Walterscheid's published rating conditions. Both ends feature 32 × 76 mm P-Series U-joints with upgraded P-Seal protection to help retain grease and protect the bearings from contamination. The matching replacement cross kit is Walterscheid 116361, OEM 1116361, featuring the 2×BBS P-Seal design.

The driveline features an S4LH inner/male steel shaft profile at End A and an S5 outer/female steel shaft profile at End B, protected by the PG25Z safety guard system. Its 1210 mm shaft length (Lz) is the compressed length measured between the two U-joint bearing centrelines, identified as ends A and B in the technical drawing. The shaft can be shortened to suit the required installation length using proper Walterscheid sizing procedures. Compatible 2400 / P400 Series connection end yokes can be fitted to the preassembled U-joints. Matching PGH20 outer and inner replacement guard halves are also available separately for compatible guard configurations.

Verify Fit: Confirm Walterscheid OEM 1113137, part 113137, P400 Series, 1210 mm Lz, and the required horsepower and torque capacity before ordering. Select compatible end yokes for the tractor and implement connections. When shortening the driveline or replacing its safety guards, verify the correct compressed and extended lengths, telescoping overlap, operating angles, guard compatibility, and safety guard coverage according to Walterscheid instructions. Connection end yokes and replacement guard halves are sold separately.

Product Specifications

Specification Details
Part Number 113137
Walterscheid OEM Number 1113137
Part Type Complete PTO Driveline Assembly
Connection End Yokes Sold Separately
Driveline Series P400 PowerDrive
2400 Series U-Joint Size
Horsepower Rating – 540 RPM 53 HP (39 kW)
Horsepower Rating – 1000 RPM 83 HP (61 kW)
Shaft Length (Lz) 1210 mm
Compressed U-Joint Centreline to Centreline
Ends A to B in Technical Drawing
Cut-to-Length Can Be Shortened to Suit Application
Follow Walterscheid Sizing Instructions
End A – Inner / Male Shaft Profile S4LH Profile
Inner Telescoping Steel Tube – 1090 mm
End B – Outer / Female Shaft Profile S5 Profile
Outer Telescoping Steel Tube – 1055 mm
Safety Guard System PG25Z – Yellow
RP5 Guard Cones at Both Ends
Safety Guard Tube Lengths Outer Guard Tube – 945 mm
Inner Guard Tube – 760 mm
U-Joint Cross Size (D1 × X) 32 × 76 mm
Both Ends – P-Seal Design
Factory-Installed U-Joints 2 P-Series Cross and Bearing Assemblies
Preassembled at Both Ends
Matching P-Seal Cross Kit 116361 – View matching cross kit
OEM 1116361
P-Seal – Upgraded Seal Design
32 × 76 mm – 2×BBS
Replacement Kit Sold Separately
Replacement Outer Guard Half 116458 – View outer guard half
OEM 1116458
PGH20 – 1500 mm
Cut-to-Fit Replacement Guard Half
Verify Guard Configuration and Final Length
Replacement Inner Guard Half 116622 – View inner guard half
OEM 1116622
PGH20 – 1500 mm
Cut-to-Fit Replacement Guard Half
Verify Guard Configuration and Final Length
End Yoke Connections 2400 / P400 Series
Tractor and Implement Connection End Yokes
Sold Separately
Included Components Telescoping P400 Driveline Assembly
2 Factory-Installed P-Series U-Joints
Complete Yellow PG25Z Safety Guard
Guard Cones and Retaining Chain

Horsepower ratings are based on Walterscheid's published rating conditions. Actual capacity depends on operating angle, load, and application.

Common Applications

Walterscheid P400 PowerDrive PTO drivelines are used on a variety of agricultural implements, particularly hay and forage equipment. This configurable shaft can be shortened and fitted with compatible connection end yokes for suitable applications. Compatibility depends on the equipment's power and torque requirements, PTO speed, operating angles, shaft length, and connection specifications.

Equipment Type Common Applications
Hay and Forage Equipment Round Balers
Baler-Wrappers
Disc Mowers and Mower-Conditioners
Tillage Equipment Selected Rotary Harrows
PTO-Driven Tillage Implements
Spreading Equipment Selected Manure Spreaders
Fertilizer Spreaders
Other Agricultural Equipment Compatible PTO-Driven Machinery
Requiring a P400-Class Driveline
Fitment Requirements Verify Horsepower and Torque Capacity,
PTO Speed, Operating Angles,
Required Shaft Length and Telescoping Overlap,
End-Yoke Connections and Overload Protection
SKU 113137

Contact Us: 1-800-561-2052

Request a Quote