Walterscheid | PTO Overrunning Clutch 2400 Series | F5/1L | 1-3/8" 6 Spline - 540 | Pull-Lock | 365660
Walterscheid 365660 is a genuine 2400 Series PTO overrunning clutch, OEM 1365660, featuring an F5/1L left-hand overrunning mechanism and a 1-3/8" 6-spline 540 RPM PTO connection with a ZV pull-lock quick-disconnect system. This clutch is designed for compatible agricultural PTO drivelines requiring one-way power transmission and protection against overrunning equipment loads.
The F5/1L overrunning clutch transmits power in one direction while allowing connected equipment to continue rotating independently when the tractor PTO slows or stops. Its internal spring-loaded locking elements engage during normal operation and release during overrunning conditions, helping prevent the momentum of rotating equipment from driving power back through the PTO shaft.
This 2400 Series clutch has a 156.5 mm length excluding the joint center and a 50 mm axial reference dimension shown on the clutch drawing. The connecting PTO U-joint uses a 32 mm bearing cup diameter (d) with a 32 × 76 mm cross size (D1 × X). The matching Walterscheid 122078 P-Seal cross kit, OEM 1122078, provides an upgraded seal design for compatible joints. See the specifications table for complete measurements and the matching cross and bearing kit.
Verify Fit: Confirm Walterscheid OEM 1365660, part 365660, F5/1L left-hand rotation, 2400 Series, 1-3/8" 6-spline 540 RPM connection, and ZV pull-lock before ordering. Verify the 32 × 76 mm cross dimensions and lubrication configuration when replacing the connecting U-joint. This product is the complete overrunning clutch assembly; the PTO cross and bearing kit is sold separately.
Product Specifications
| Specification | Details |
|---|---|
| Part Number | 365660 |
| Walterscheid OEM | 1365660 |
| Part Type | PTO Overrunning Clutch |
| Clutch Type | F5/1L |
| Driveline Series | 2400 Series |
| PTO Connection (A) | 1-3/8" 6 Spline – 540 RPM Internal Splined Bore |
| Locking Type | ZV – Pull-Lock Quick-Disconnect |
| Overrunning Direction | Left-Hand (L) |
| Length Without Joint Center | 156.5 mm |
| Axial Reference Dimension | 50 mm – As shown on clutch drawing |
| Distance from Drilling End | 28 mm |
| Compatible Cross Size (D1 × X) | 32 × 76 mm |
| Bearing Cup Diameter (d / D1) | 32 mm |
| Cross Overall Length (X) | 76 mm |
| Matching PTO Cross Kit |
122078 – View matching cross kit OEM 1122078 P-Seal – Upgraded Seal Design 32 × 76 mm - Verify Joint Configuration |
| Clutch Housing Reference | 365418 / OEM 1365418 |
| Surface Finish | Yellow Painted |
| Engineering Drawing | 56.137.40 |